Power Division
Stage 3 Kit - Audi RS Q8 4M
MODIFICATION SCOPE:
• Power Division Air intake Set
• Power Division Intercoolers Set
• Racing Spark Plugs Set
• Power Division 4 Bar MAP Sensors Set
• Power Division Exhaust Manifolds Set
• Power Division PD1200 Turbochargers Set
• Power Division High-Pressure Fuel System Set
• Power Division Low-Pressure Fuel System Set
• Power Division Sports Cat / De-Cat Downpipes Set
• Power Division Frontpipes Set
RESULT:
• Engine performance improvement - 950HP / 1200Nm
• 100-200 km/h acceleration - 5,1s
• Gearbox operation speed improvement
• Improved engine and exhaust sounds
• POWER DIVISION AIR INTAKE SET ↓
LET YOUR ENGINE BREATH.
The main goal behind the creation of Power Division Carbon intake system was clear – to deliver the Plug & Play Intake Set which will be able to support the most powerful builds.
We spent tens on hours on analyzing, testing and prototyping the best solution and finally we achieved our goal, which is now available to everybody.
Power Division’s engineers completely redesigned the stock AirBox, which thanks to use almost entire available space under the hood resulted in unprecedented increase of airflow.
What is more, we changed the shapes to make sure that air will be flowing to the engine in the most optimal way.
To reveal the full potential of airbox, every Power Division Intake Kit is equipped with a panel high-flow air filter which drastically increases the airflow – such necessary for every modified car.
As a next step, we make sure that the air travels from airbox into the turbos without any unnecessary distortions - leaving airbox, air goes through enlarged silicone hoses directly into completely redesigned turbo inlets.
Size of this element was supported by accurate flow calculations, which as a result allowed us to change the diameter by 35%.
With all objectives met, our intake system delivers on all fronts and allows for the turbos to generate boost more efficiently.
This results in an improved throttle response and significant power gains, independently tested which increase with higher states of tune.
The performance gains measured are a result of the complete system we have developed from the airbox base to the lid and the inlets.
With all that affords Power Division’s carbon intake system become an entry, but crucial element on the every modification.
No matter if your target is 750 or 1200 HP – the intake will be able to feed up the engine with the required amount of fresh air.
Key features:
- 35% bigger plenum, turbo inlets & hoses compared to the original part.
- Handcrafted with top-tier materials.
- Guaranteed power gains for Stage1, Stage2, Stage3 & Stage4 builds.
- Tested up to 1200 HP
• POWER DIVISION INTERCOOLERS SET ↓
PLAY IT COOL.
The core size of the new Power Division Intercoolers Set offers 90% more volume than the factory-mounted intercooler.
Our experts have enhanced the end tank design to eliminate any OEM bottlenecks, increased the intercooler core size and efficiency, and boosted flow rating and charge cooling capabilities.
Every of our Intercooler Set makes use of a newly created, specially designed Power Division Intercooler Core - which is one of the finest, and most efficient Tube Fin cores available on the market.
The best possible internal airflow was achieved by optimizing the design using advanced flow analysis and simulations.
To guarantee that our intercoolers receive the best cooling air possible, every set additionally includes 2 pieces of tailor-made carbon air shroud.
Our intercoolers set is the best choice when it comes to extreme builds, letting you exceed powers of 1200 HP in your vehicle, while still maintaining low intake temperatures.
Each of our Intercoolers sets is put through a demanding quality check and tested for compressive strength up to 2.8 bar, before handing it over.
Key features:
- 30% higher core
- 40% thicker core
- 90% greater overall core volume
- Eleminated OEM end tanks bottlenecks
- Handcrafted with top-tier authors alloys
- Plug & Play design
- Guaranteed power gains for Stage 2, Stage 3 & Stage 4 builds
- Tested up to 1200 HP
• POWER DIVISION PD1200 TURBOCHARGERS SET ↓
FEEL THE BOOST.
Meet Our Author's PD1200 Set - One of its kind, Tailor-made Turbochargers for the most demanding EA825 platform builds in the world.
Handcrafted with passion and attention to the smallest detail.
Designed to exceed the mark of 1200 HP with ease, while still maintaining early response, for perfect everyday driveability.
Equipped with, a larger billet compressor impeller, modified turbine wheel, Precisely machined housing, and reinforced, ball bearing, which enables a high engine performance at the lowest possible charge pressure, while still delivering an extremely strong top end.
Thanks to Plug & Play design, our turbochargers will perfectly fit into the engine bay of your vehicle and its OEM components, without a need of their further adaptation.
Key features:
- Drastically improved charge pressure, without sacrificing the everyday driveability & flexability
- Extremely strong top end
- Enlarged billet compressor
- Precisely machined housing
- Reinforced plain bearing
- Modified turbine wheel
- Plug & Play design
- Guaranteed power gains for Stage 3 & Stage 4 builds.
- Tested up to 1200 HP
• POWER DIVISION HIGH-PRESSURE & LOW-PRESSURE FUEL SYSTEM SET ↓
MORE FUEL - MORE POWER.
Our High-Pressure & Low-Pressure Fuel System Set was developed with no compromises, and with the aim to address one main criterion: to drastically increase the maximum volume of fuel delivered to the engine cylinders.
Thanks to this, the stock engine injectors are now capable of satisfying the fuel requirements at the whole RPM range set by the most extreme builds - even those exceeding the 1200 HP mark.
We achieved this by boosting the voltage of the stock fuel pump up to 24Vdc, manufacturing our author's increased-diameter fuel lines, and increased displacement of the high-pressure fuel pumps while using best-quality components with extremely strict tolerances.
Key features:
- Drastically improved fuel supply, without a need to change stock fuel pump and injectors
- Enlarged high-pressure fuel pumps & fuel lines
- Plug & Play design
- Guaranteed power gains for Stage 3 & Stage 4 builds.
- Tested up to 1200 HP
• POWER DIVISION 4 Bar MAP SENSORS SET ↓
EVERYTHING UNDER CONTROL.
With our MAP sensors you can run up to 4 bar charge pressure on your EA825 engine, which is required in high-power builds.
Key features:
- Supports readings up to 4 Bar of charge pressure
- Plug & Play design
- Tested up to 1200 HP
• POWER DIVISION EXHAUST MANIFOLDS SET ↓
THE ULTIMATE EXHAUST FLOW.
Power Division Exhaust Manifolds will improve exhaust flow of your vehicle, allowing for its best possible entrance into the turbochargers, and maintaining its full momentum, which leads to their increased performance.
Every Power Division Exhaust Manifold is precisely hand-made using our authors stainless steel alloys, and is additionally insulated to prevent overheating of the surrounding parts.
Key features:
- Enlarged ports
- Improved exhaust flow rate
- Improved throttle response
- Improved turbo spool through the whole RPM range
- Plug & Play design
- Guaranteed power gains for Stage 3 & Stage 4 builds.
- Tested up to 1200 HP
• POWER DIVISION DOWNPIPES SET↓
BE HEARD.
Thanks to our high-flow design, the Power Division Downpipes will enhance the overall performance of your vehicle and will deliver a unique sound experience: from a low-down rumble to a strong mid-range V8 character and high-frequency top-end - giving you the ultimate driving experience.
Every Power Division Downpipe is hand-made with the highest quality stainless steel and is additionally insulated to prevent overheating of the surrounding parts.
Designed to perfectly fit in the space between the turbocharger and center exhaust, replacing the factory-mounted catalyst.
Our Sports Cat Downpipes will additionally enable You to pass emissions tests or roadside checks, while still improving previously mentioned aspects of your vehicle.
- Improved exhaust flow rate
- Improved throttle response
- Improved engine sound
- Plug & Play design
- Guaranteed power gains for Stage 1, Stage 2, Stage 3 & Stage 4 builds.
POWER DIVISION STAGE 3 DYNO GRAPH & PERFORMANCE REPORT↓
